automatic rod and large tube finishing machine

Home » Products » automatic rod and large tube finishing machine
  • automatic rod and large tube finishing machine
  • metal tube polishing equipment
  • metal tube polishing equipment

automatic rod and large tube finishing machine

  • Used for big diameter straight round tube
  • 100% mirror finishing, clean rust
  • Less maintenance than common machine
  • Overseas service available

 

Inquiry Now

Product Description

Automatic rod and large tube finishing machine shown as below for big diameter straight round tube and rod finishing. The rod and tube to be polished can have tapers or varying diameters.  Tube type wheel polishing machine can be installed in accordance with the requirements of the product, belt, nylon wheel, flax wheel, cloth wheel and other supplies corresponding to iron, aluminum, stainless steel, acrylic, and other tube sanding, brush finishing, polishing.

The advantages of our tube finishing machine are below:

  • High profitability and high production
  • Intelligent and humane designation
  • Precision finishing without deformation after polishing
  • Higher production can up to 15m/min with 8K mirror finishing. Common machine only can achieve 8m/min

Specification of tube finishing machine

automatic rod and large tube finishing machine
Motor17 KW
Voltage380V,50/60HZ,3Phase
Spindle speed1800r/min
Conveyor speed0-15 m/min
Mechanical controlPLC program
Tube OD20-180 mm
Tube length1500—6000 mm
Input speed0–6 m/min
Consumable250*150 mm*3
ROHSEnvironment protection completely with dust cover

 

Details section of large tube finishing machineautomatic rod and large tube finishing machine

Loading/Unloading section of the tube finishing machine

automatic stainless steel tube centerless polishing machine

The polished tubes and rods

automatic rod and large tube finishing machine

Consumables usage

How to use consumables to get needed finish by this tube finishing machine?

 Manufacturing costs, timelines and right polished finishing are always under tight scrutiny from last 20 years. Here, we can give you options at every point of polishing process that ultimately determine your success with 6 levels of polishing range from grinding to 100% 8K mirror finishing. We can use right consumables and polishing process to achieve a profitable cost and get right polished finishing as you need. Details of 6 levels as below:

  • Grinding finish:  Usually use 60#-80# grit abrasive belt or flap wheels.
  • Brushed finish:   Usually use 120#-180# grit abrasive belt or flap wheels.
  • Sanitary finish:   Usually use 180#-240# grit abrasive belt or flap wheels.
  • Polished finish:   Usually use 240#-320# grit abrasive belt or flap wheels, then use sisal wheel.
  • Glossy finish:     Usually use 400#-600# grit abrasive belt or flap wheels,  sisal wheel, common cloth wheel.
  • Mirror finish:       Usually use 600#-800# grit abrasive belt,then use sisal wheel,hard cloth wheel,at last step use cotton wheels to get 100% 8K Mirror finishing.

Picture of consumables

metal tube polishing equipment

 

Reviews

There are no reviews yet.

Be the first to review “automatic rod and large tube finishing machine”

Your email address will not be published. Required fields are marked *